Shopping Cart
LAMP HOLDER COMPONENTS: Each lamp holder consists of 4 pieces: a cap with M10x1 female thread for fixing, a connection clamp with screws for connecting the cables, an externally threaded sleeve with stop and a ring nut for screwing onto the sleeve and fixing a lampshade. CONNECTOR TERMINAL: Designed for rigid or flexible cables with a cross-section of 0.5 to 1 mm². Provides a secure connection with an electrical voltage of 250V and 2A. MOUNTING VERSATILITY: The cap's M10x1 thread makes it easy to mount directly onto threaded tubes in ceiling or tabletop lighting fixtures. It can also be used for pendants by mounting directly onto the cable using a cable gland and M10x1 male thread. Supports a maximum weight of 1 kg! GUARANTEED SAFETY: Both the sleeve and the internal disc are equipped with a safety locking system. This intelligent mechanism prevents accidental unscrewing along with the bulb, avoiding exposure of the electrical contacts. If you need to unlock it, it's simple: simply insert a screwdriver inside and press the locking tab on the connection disc while unscrewing the sleeve from the cap. For your safety, it is essential to disconnect these products from the electrical supply before handling them. If in doubt, we recommend contacting a certified electrician.